poland XJ550 workover rig

XJ550 (100 tons) workover rig is specially used for drilling and workover operation in oilfields.

Category:

polandWorkover Rig

Tel: +86-546-7278383

Inquire

Product Description

XJ550 (100 tons) workover rig is specially used for drilling and workover operation in oilfields. Its chassis adopts 10×8 drive. The power unit adopts CAT diesel engine and Allison transmission case. The winch is of a double-drum structure. The maximum hook load is 1350 kN. The derrick is of a rectangular portal split outfit structure with a double-layer platform. It is 35 m high. Rotary table, derrick floor, swivel and other drilling components are optional. The rig can complete drilling independently.

Product model			XJ550 (100 tons)
Nominal minor repair depth	Φ73mm (2-7/8" thickened tubing)	m	7000
Nominal overhaul depth	Φ73mm (2-7/8" drill pipe)	m	5800
	Φ88.9mm (3-1/2" drill pipe)	m	4500
	Φ114mm (4-1/2" drill pipe)	m	3600
Drilling depth		m	2000
Large hook load rating		Kw	1000
Large hook maximum load		Kw	1350
Engine model			CAT C15
Engine power		Kw(hp)	354(475)
Gearbox model			Allison M5610AR
Chassis drive form			10*8
Approach/departure angle			25°/16°
Minimum ground clearance		mm	310
Derrick height		m	35
Derrick form			Front open type double-section hydraulic lifting and telescopic
Effective number of ropes			8（4*5）
Lifting wire rope diameter		mm	F26
Mobile state dimensions (length * width * height)		m	19.873.104.2
Total mass of the whole machine		medical history	53000
Drum form			Single/double drum
The main drum assists the brakes			Pneumatically controlled disc brakes